Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-25001.png)
Radiator Cooling Fan Motor Relay: Testing and Inspection
2ZR-FE COOLING: RELAY: ON-VEHICLE INSPECTION
1. INSPECT COOLING FAN RELAY
(a) Remove the relay from the engine room relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the cooling fan relay.
(d) Install the relay to the engine room relay block.
