Matrix FWD L4-1.8L (2ZR-FE) (2010)
Dome Lamp Switch: Service and Repair
Installation
LIGHTING (INT): BACK DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL BACK DOOR LOCK ASSEMBLY
(a) Install the back door lock assembly with the 3 bolts.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
(b) Connect the connector.
(c) Connect the rod as shown in the illustration.
(d) Connect the back door lock control cable sub-assembly.
2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly
3. INSTALL BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
4. INSTALL BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
5. INSTALL BACK DOOR CENTER GARNISH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly