Matrix FWD L4-1.8L (2ZR-FE) (2010)
(a) Using a moulding remover, disengage the clip and 7 claws.
(b) Disconnect the connector and remove the front armrest upper base panel RH.
2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the power window regulator switch
assembly.
Installation
WINDOW / GLASS: FRONT PASSENGER SIDE POWER WINDOW SWITCH: INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws to install the power window regulator switch assembly.
2. INSTALL FRONT ARMREST UPPER BASE PANEL RH
(a) Connect the connector.