Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1487004.png)
7. REMOVE GENERATOR DRIVE END FRAME BEARING
(a) Remove the 4 screws and bearing retainer plate from the drive end frame.
(b) Using SST and a hammer, tap out the generator drive end frame bearing from the generator drive end frame.
SST : 09950-60010
09951-00250
SST : 09950-70010
09951-07100
Reassembly
2ZR-FE BATTERY / CHARGING: GENERATOR: REASSEMBLY
1. INSTALL GENERATOR DRIVE END FRAME BEARING
(a) Using SST and a press, press in a new generator drive end frame bearing.
SST : 09950-60010
09951-00470
