Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1508015.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reinstall the ST relay.
NG -- REPLACE RELAY (ST RELAY)
OK -- Continue to next step.
19. INSPECT ST RELAY (VOLTAGE)
(a) Remove the ST relay from the No. 8 relay block.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(c) Reinstall the ST relay.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (BATTERY - ST RELAY)
OK -- Continue to next step.
20. CHECK HARNESS AND CONNECTOR (ST RELAY - BODY GROUND)
(a) Remove the ST relay from the No. 8 relay block.
