toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 6092 > < Components|Page 6090
Page 1
background image

Front Steering Knuckle: Service and Repair
Removal

AXLE AND DIFFERENTIAL: STEERING KNUCKLE: REMOVAL

HINT
*

Use the same procedure for the RH side and LH side.

*

The procedure listed below is for the LH side.

1. REMOVE FRONT WHEEL

2. REMOVE FRONT AXLE SHAFT NUT (for 2AZ-FE)   See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair/Removal and Replacement/Removal

3. REMOVE FRONT AXLE SHAFT NUT (for 2ZR-FE)   See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair/Removal and Replacement/Removal

4. SEPARATE FRONT SPEED SENSOR   See: Suspension/Ball Joint/Service and Repair/Removal

5. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY   See: Wheels and Tires/Wheel Fastener/Service and Repair/Front Axle Hub

Bolt/Replacement

6. REMOVE FRONT DISC   See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front

Brake/Removal

7. SEPARATE TIE ROD END SUB-ASSEMBLY (for 2WD)   See: Steering Gear/Service and Repair/Removal

8. SEPARATE TIE ROD END SUB-ASSEMBLY (for 4WD)   See: Steering Gear/Service and Repair/Removal

9. SEPARATE FRONT LOWER SUSPENSION ARM   See: Suspension/Ball Joint/Service and Repair/Removal

10. REMOVE FRONT AXLE ASSEMBLY   See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal

11. REMOVE FRONT LOWER BALL JOINT   See: Suspension/Ball Joint/Service and Repair/Removal

12. REMOVE FRONT AXLE HUB HOLE SNAP RING   See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal

13. REMOVE FRONT AXLE HUB SUB-ASSEMBLY   See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal

14. REMOVE FRONT DISC BRAKE DUST COVER   See: Suspension/Wheel Hub/Service and Repair/Front Axle Hub/Removal

15. REMOVE STEERING KNUCKLE

(a) 2ZR-FE:

(1) Place the front axle hub bearing inner race (outside) on the front axle hub bearing.

(2) Using SST and a press, remove the front axle hub bearing from the steering knuckle.

SST : 09223-15020

SST : 09387-02010

SST : 09950-60010

09951-00640

SST : 09950-70010

09951-07100

Components|Page 6092 > < Components|Page 6090