Matrix FWD L4-1.8L (2ZR-FE) (2010)
(a) Engage the 2 pins to install the No. 1 steering wheel ornament to the steering wheel sub-assembly.
(b) Install the screw.
7. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
8. ADJUST SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
9. INSTALL STEERING WHEEL ASSEMBLY
(a) Align the matchmarks on the steering wheel assembly and steering main shaft.
(b) Install the steering wheel assembly set nut.
Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
(c) Connect the connectors to the spiral cable sub-assembly.
10. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
11. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
12. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation