Matrix FWD L4-1.8L (2ZR-FE) (2010)
13. SEPARATE REAR FLEXIBLE HOSE RH
HINT
Perform the same procedure as the LH side.
14. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH See: Wheels and Tires/Wheel Fastener/Service and Repair/Rear Axle Hub
Bolt/Replacement
15. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
16. REMOVE REAR DISC LH See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Rear Brake (for
Torsion Beam Type Suspension)/Removal
17. REMOVE REAR DISC RH
HINT
Perform the same procedure as the LH side.
18. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH See: Wheel Hub/Service and Repair/Rear Axle Hub (for Torsion Beam Type
Suspension)/Removal
19. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
20. REMOVE REAR AXLE BEAM DAMPER See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar (for Torsion Beam Type
Suspension)/Removal
21. REMOVE REAR STABILIZER BAR See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar (for Torsion Beam Type Suspension)/Removal
22. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING LH
(a) Support the rear axle beam assembly using a jack and wooden block.
NOTICE:
Do not excessively jack up the rear axle beam assembly.