Matrix FWD L4-1.8L (2ZR-FE) (2010)
60. CONNECT REAR SPEED SENSOR WIRE LH (for 2WD) See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel
Speed Sensor/Service and Repair/Rear Speed Sensor/Installation
61. CONNECT REAR SPEED SENSOR WIRE RH (for 2WD)
HINT
Perform the same procedure for the LH side.
62. INSTALL REAR SPEED SENSOR LH (for 4WD)
(a) Install the rear speed sensor LH with the bolt and nut.
Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
Nut - Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
NOTICE:
Do not twist the rear speed sensor LH when installing it.
(b) Install the rear speed sensor LH to the rear axle carrier sub-assembly with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
*
Be careful not to damage the speed sensor.
*
Keep the speed sensor clean.
*
Do not twist the sensor wire LH when installing it.
63. INSTALL REAR SPEED SENSOR RH (for 4WD)
HINT
Perform the same procedure for the LH side.
64. INSTALL REAR DISC LH See: Brakes and Traction Control/Disc Brake System/Service and Repair/Overhaul/Rear Brake (for Double
Wishbone Type Suspension)/Reassembly
65. INSTALL REAR DISC RH
HINT
Perform the same procedure for the LH side.
66. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH See: Wheels and Tires/Wheel Fastener/Service and Repair/Rear Axle Hub
Bolt/Replacement
67. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY RH