Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1258002.png)
(b) Remove the nut from the clutch pedal support sub-assembly.
6. REMOVE CLUTCH PEDAL STOPPER BOLT
(a) Remove the clutch pedal stopper bolt from the clutch pedal support sub-assembly.
7. REMOVE CLUTCH PEDAL SPRING (for 2AZ-FE)
(a) Remove the clutch pedal spring.
8. REMOVE TURNOVER SPRING SEAT COMPRESSION SPRING
(a) Mount the clutch pedal in a soft jaw vise.
(b) While the clutch pedal is fully depressed, remove the turnover spring.
(c) Remove the 2 turnover bushings from the clutch pedal sub-assembly and clutch pedal support sub-assembly.
