Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1267006.png)
SST : 09308-10010
15. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
(a) Using SST, remove the rear drive pinion front tapered roller bearing (inner race) from the drive pinion.
SST : 09556-30010
16. REMOVE REAR DIFFERENTIAL PRESSURE CONTROL HOSE
(a) Remove the 2 differential pressure control hose clips and rear differential pressure control hose.
17. REMOVE DIFFERENTIAL PRESSURE CONTROL HOSE ELBOW
(a) Put matchmarks on the differential pressure control hose elbows and rear differential carrier.
(b) Using a screwdriver, remove the 2 differential pressure control hose elbows.
HINT
Tape the screwdriver tip before use.
18. REMOVE DIFFERENTIAL SIDE BEARING RETAINER
(a) Remove the 10 bolts from the differential carrier.
