toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Seals and Gaskets, Differential > < Fluid - Differential|Service and Repair
Page 2
background image

*

After adding oil, drive the vehicle and recheck the oil level.

5. INSPECT AND ADJUST DIFFERENTIAL OIL

(a) Stop the vehicle in a level place.

(b) Check that the oil level is between 0 and 5 mm (0 and 0.197 in.) from the bottom lip of the differential carrier cover plug opening.

NOTICE:
*

When adding differential oil, make sure the vehicle is level.

*

An excessively large or small amount of oil may cause damage.

*

After adding oil, drive the vehicle and recheck the oil level.

(c) Check for oil leakage if the oil level is low.

(d) Using a hexagon wrench (10 mm), install the differential carrier cover plug and a new gasket.

Torque : 39 Nm (398 kgf-cm, 29 ft-lbf)

Seals and Gaskets, Differential > < Fluid - Differential|Service and Repair