Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1322001.png)
Clutch Pedal Position Sensor / Switch: Service and Repair
Installation
CLUTCH: CLUTCH PEDAL SWITCH: INSTALLATION
1. INSTALL CLUTCH PEDAL SWITCH ASSEMBLY
(a) Install the clutch pedal switch assembly to the clutch pedal support sub-assembly with the nut.
Torque : 16 Nm (160 kgf-cm, 12 ft-lbf)
(b) Connect the clutch pedal switch assembly connector.
2. INSPECT CLUTCH PEDAL SWITCH ASSEMBLY See: Clutch/Testing and Inspection/Component Tests and General Diagnostics
