Matrix FWD L4-2.4L (2AZ-FE) (2009)
-
Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
-
Confirm that the rivets are seated properly against the speaker.
NOTICE:
-
Do not tilt the riveter when installing the rivet to the speaker.
-
Do not leave any clearance between the rivet head and speaker.
-
Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivet.
(b) Connect the connector.
2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
3. INSTALL REAR DOOR ARMREST UPPER BASE PANEL (w/o Power Window) See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Reassembly
4. INSTALL REAR DOOR ARMREST UPPER BASE PANEL (w/ Power Window) See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Reassembly
5. INSTALL REAR DOOR INSIDE HANDLE BEZEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Reassembly
6. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Service and Repair/Reassembly