Matrix FWD L4-2.4L (2AZ-FE) (2009)
Speaker: Testing and Inspection
Instrument Panel Speaker
AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT FRONT NO. 3 SPEAKER (for 7 Speakers)
HINT: Remove interior parts so that the front No. 3 speaker can be seen.
(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 3 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 3 speaker.
(c) Speaker resistance check
(1) Disconnect the front No. 3 speaker connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the front No. 3 speaker.