Matrix FWD L4-2.4L (2AZ-FE) (2009)
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Using a brush or a sponge, coat the application area of the adhesive with Primer G.
Standard Dimension:
NOTICE:
-
Do not apply too much primer.
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
HINT:
-
Apply Primer G onto the ceramic notches.
-
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(c) Apply adhesive to the back door glass.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
HINT: After cutting off the tip, use all the adhesive within the time described in the table below.
Usage Time Frame:
(2) Load the sealer gun with cartridge.
(3) Apply adhesive to the back door glass as shown in the illustration.