Matrix FWD L4-2.4L (2AZ-FE) (2009)
Body Emblem: Service and Repair
Name Plate
Removal
EXTERIOR PANELS / TRIM: NAME PLATE: REMOVAL
REMOVAL
HINT: When removing the name plates and emblems, heat the vehicle body, name plates and emblems using a heat light.
Heating Temperature:
NOTE: Do not heat the vehicle body, name plates or emblems excessively.
1. REMOVE SYMBOL EMBLEM
(a) Put protective tape around the emblem.
(b) Using a moulding remover, peel off the double-sided tape to remove the emblem.
NOTE: Be careful not to damage the vehicle body.
2. REMOVE SYMBOL EMBLEM
(a) Put protective tape around the emblem.
(b) Using a moulding remover, peel off the double-sided tape to remove the emblem.
NOTE: Be careful not to damage the vehicle body.
3. REMOVE NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Put protective tape around the name plate.
(b) Using a moulding remover, peel off the double-sided tape to remove the name plate.