Matrix FWD L4-2.4L (2AZ-FE) (2009)
Standard Measurement:
4. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.
Standard Measurement:
5. INSTALL NO. 1 BACK DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.