Matrix FWD L4-2.4L (2AZ-FE) (2009)
Strut Tower Brace: Service and Repair
Disposal
FRONT SUSPENSION: FRONT STRUT BAR: DISPOSAL
DISPOSAL
1. DISPOSE OF SUSPENSION TOWER DAMPER ASSEMBLY
(a) Fully extend the suspension tower damper assembly.
(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
A to B:
10 mm (0.394 in.)
NOTICE:
-
Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
-
The gas is colorless, odorless and non-poisonous.