Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2213001.png)
Headliner: Service and Repair
Installation
INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 ROOF WIRE (w/o Sliding Roof)
(a) Install the No. 1 roof wire.
(b) Apply adhesive tape to the locations shown in the illustration.
HINT:
-
As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.
2. INSTALL NO. 1 ROOF WIRE (w/ Sliding Roof)
(a) Engage the 3 clamps, and install the No. 1 roof wire.
