Matrix FWD L4-2.4L (2AZ-FE) (2009)
(a) Engage the 4 claws and 2 guides, and install the rear combination light service cover LH.
26. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)
(a) Engage the claw, and install the 2 No. 1 luggage compartment trim hooks.
(b) Install the 2 screws.
27. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)
(a) for front side:
(1) Install the luggage hold belt striker assembly with the bolt.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
(b) for rear side:
(1) Install the luggage hold belt striker assembly with the bolt.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
28. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear
Seat Outer Belt Assembly/Installation
29. INSTALL REAR SEAT SIDE GARNISH LH