Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2221001.png)
Power Door Lock Actuator: Testing and Inspection
Front Door Lock
DOOR LOCK: FRONT DOOR LOCK: INSPECTION
INSPECTION
1. INSPECT FRONT DOOR LOCK ASSEMBLY (for Driver Side)
(a) Apply battery voltage to the motor terminals and check the operation of the door lock motor.
OK:
If the result is not as specified, replace the door lock assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the door lock assembly.
