Matrix FWD L4-2.4L (2AZ-FE) (2009)
Power Mirror Switch: Testing and Inspection
MIRROR (EXT): OUTER MIRROR SWITCH: INSPECTION
INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
(a) Inspect the L position of the left/right adjustment switch: Measure the resistance according to the value(s) in the table below.
Standard resistance (for left side):
If the result is not as specified, replace the switch assembly.
(b) Inspect the R position of the left/right adjustment switch: Measure the resistance according to the value(s) in the table below.
Standard resistance (for right side):
If the result is not as specified, replace the switch assembly.