Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1430004.png)
(d) Remove the nut from the brake pedal support sub-assembly.
Installation
BRAKE SYSTEM (OTHER): BRAKE PEDAL: INSTALLATION
INSTALLATION
1. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY
(a) Install the nut to the brake pedal support sub-assembly.
(b) Install the brake pedal support sub-assembly with the 4 nuts.
Torque: 13 Nm (132 kgf-cm, 10 ft-lbf)
(c) Engage the 2 clamps to the brake pedal support sub-assembly.
