Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1456010.png)
(d) Remove the No. 3 parking brake cable assembly.
HINT: Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the
clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.
(e) Separate the No. 3 parking brake cable clamp.
(f) Remove the bolt and pull out the No. 3 parking brake cable assembly to outside of the body.
(g) Remove the 2 bolts and No. 3 parking brake cable assembly.
