Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1456013.png)
(c) Install the bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(d) Install the No. 3 parking brake cable clamp.
(e) Install the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly LH.
HINT: Be sure to engage the No. 3 parking brake cable assembly clip onto the rear disc brake cylinder assembly LH as shown in the
illustration.
(f) Connect the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly LH.
