Matrix FWD L4-2.4L (2AZ-FE) (2009)
Parking Brake Lever: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE LEVER: INSTALLATION
INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a) Install the parking brake switch assembly to the parking brake lever sub-assembly with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
2. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.
(b) Bend the parking brake lever claw.