Matrix FWD L4-2.4L (2AZ-FE) (2009)
Parking Brake Warning Switch: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION
INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a) Connect the connector to the parking brake switch assembly.
(b) Install the parking brake switch assembly to the parking brake lever assembly with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
2. INSPECT BRAKE WARNING LIGHT See: Parking Brake System/Adjustments
3. INSTALL FRONT UPPER CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Lower Instrument Panel/Installation