Matrix FWD L4-2.4L (2AZ-FE) (2009)
(a) Install the front speed sensor with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
-
Prevent foreign matter from attaching to the sensor tip.
-
Do not file the hole or the contact surface because the gap between the magnet rotor and front speed sensor is important.
(b) Install the clamp to the shock absorber.
(c) Temporarily install the No. 1 sensor clamp to the shock absorber.