Matrix FWD L4-2.4L (2AZ-FE) (2009)
Cruise Control Switch: Service and Repair
Installation
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION
INSTALLATION
1. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Engage the pin and install the cruise control main switch as shown in the illustration.
(b) Connect the connector.
(c) Install the 2 screws.
2. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
7. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.