Matrix FWD L4-2.4L (2AZ-FE) (2009)
Water Pump: Testing and Inspection
2AZ-FE COOLING: WATER PUMP: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. SEPARATE RADIATOR RESERVE TANK ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE GENERATOR ASSEMBLY
HINT: See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and Replacement/Removal
3. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE WATER PUMP PULLEY See: Service and Repair/Removal
5. INSPECT WATER PUMP ASSEMBLY
(a) Visually check the drain hole and air hole for coolant leakage.
If leakage is found, replace the water pump assembly.
(b) Turn the pulley, and then check that the water pump bearing moves smoothly without making a "click" sound.
If it does not move smoothly, replace the water pump assembly.
6. INSTALL WATER PUMP PULLEY See: Service and Repair/Installation
7. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
8. INSTALL GENERATOR ASSEMBLY
HINT: See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and Replacement/Installation
9. INSTALL RADIATOR RESERVE TANK ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation