Matrix FWD L4-2.4L (2AZ-FE) (2009)
Variable Valve Timing Actuator: Service and Repair
Installation
2AZ-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION
INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
(b) Install the camshaft timing oil control valve assembly with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
(c) Connect the camshaft timing oil control valve connector.
(d) Install the vacuum hose clamp with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
2. INSPECT FOR OIL LEAK
3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation