Matrix FWD L4-2.4L (2AZ-FE) (2009)
(b) Turn the crankshaft counterclockwise, then disconnect the hook from the pin.
(c) Turn the crankshaft clockwise, then check that the plunger is extended.
22. INSTALL OIL PAN SUB-ASSEMBLY
(a) Remove any old packing material and be careful not to drop any oil on the contact surfaces of the cylinder block and oil pan.
(b) Apply a continuous bead of seal packing (Diameter 4.0 to 4.5 mm (0.158 to 0.177 in.)) as shown in the illustration.
Seal packing:
Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
NOTICE:
-
Remove any oil from the contact surfaces.
-
Install the oil pan within 3 minutes of applying seal packing.
-
Do not add engine oil for at least 2 hours after installing the oil pan.
(c) Install the oil pan onto the cylinder block.