Matrix FWD L4-2.4L (2AZ-FE) (2009)
Exhaust Pipe: Service and Repair
Removal
2AZ-FE INTAKE / EXHAUST: EXHAUST PIPE (for 2WD): REMOVAL
REMOVAL
1. REMOVE TAIL EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports. (for Torsion beam type suspension)
(c) Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports. (for Double wishbone type suspension)
(d) Remove the gasket from the center exhaust pipe assembly.
(e) Remove the exhaust tail pipe baffle sub-assembly. (with baffle model)
2. REMOVE HEATED OXYGEN SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Heated Oxygen Sensor/Removal
3. REMOVE CENTER EXHAUST PIPE ASSEMBLY