Matrix FWD L4-2.4L (2AZ-FE) (2009)
(c) Fully insert a new gasket to the center exhaust pipe assembly.
NOTICE:
-
Be sure to install the gasket in the correct direction.
-
Do not reuse the gasket.
-
Do not damage the gasket.
(d) Connect the tail exhaust pipe assembly to the 3 exhaust pipe supports. (for Torsion beam type suspension)
(e) Connect the tail exhaust pipe assembly to the 2 exhaust pipe supports. (for Double wishbone type suspension)
(f) Install the tail exhaust pipe assembly with the 2 bolts and 2 compression springs.
Torque: 43 Nm (440 kgf-cm, 32 ft-lbf)
5. INSPECT FOR EXHAUST GAS LEAK