Matrix FWD L4-2.4L (2AZ-FE) (2009)
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: REMOVAL
REMOVAL
1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover) See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower Instrument Panel/Removal
2. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)
(a) Disengage the clamp.
(b) Disconnect the connector.
(c) Remove the 3 screws and the blower motor sub-assembly.
3. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)
(a) Disengage the clamp.
(b) Remove the quick heater connector screw.
(c) Disconnect the connector.
(d) Remove the 3 screws and the blower motor sub-assembly.
Installation
HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION
INSTALLATION
1. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)
(a) Install the blower motor sub-assembly with the 3 screws.
(b) Connect the connector.
(c) Engage the clamp.
2. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)