Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-2392002.png)
(b) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.
Standard Resistance:
If the value is not as specified, replace the fuel sender gauge assembly.
3. REMOVE FUEL SENDER GAGE RH ASSEMBLY
(a) Check that the float moves smoothly between F and E.
(b) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.
Standard Resistance:
