Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-476002.png)
HINT: * for Mexico vehicle height, B and C points are 15 mm (0.591 in.) higher than standard vehicle.
3. INSPECT WHEEL ANGLE
(a) Put tread center marks on the rearmost points of the turning radius gauge.
(b) Turn the steering wheel to the left and right full lock positions, and measure the turning angle.
Wheel Angle (Unloaded Vehicle):
If the angles are not as specified, check and adjust the right and left rack end lengths.
4. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION
(a) Install the camber-caster-kingpin gauge or place the front wheels on the center of the wheel alignment tester.
(b) Inspect the camber, caster and steering axis inclination.
Camber Inclination (Unloaded Vehicle):
