Matrix FWD L4-2.4L (2AZ-FE) (2009)
HINT:
-
The initialization is completed when the "ID Tire Inflation Pressure" display shows the correct pressures.
-
*: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform
troubleshooting according to the inspection procedure for DTCs C2121/21 to C2124/24 See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/C Code Charts/C2121.