Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1627001.png)
Auxiliary Power Outlet: Testing and Inspection
POWER OUTLETS (INT): VOLTAGE INVERTER: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT VOLTAGE INVERTER
HINT: Remove interior parts so that the voltage inverter can be seen.
(a) Disconnect the voltage inverter connector.
(b) Measure the voltage according to the values in the table below.
Standard Voltage:
HINT: If the result is not as specified, repair or replace harness or connector.
(c) Reconnect the voltage inverter connector.
(d) Measure the voltage according to the values in the table below.
Standard Voltage:
HINT: If the result is not as specified, replace the voltage inverter See: Service and Repair/Voltage Inverter/Removal.
