toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Information Bus|Testing and Inspection > < Diagram Information and Instructions|Page 2928
Page 3
background image

(a) DTCs for the CAN communication system are as follows: U0073, U0100, U0123, U0124, U0126, U0129*1, U0114*1, U1002*2 and

B1499*2.
*1: for 4WD
*2: w/ Air conditioning system

6. TROUBLESHOOTING REMARKS

(a) DTCs for the CAN communication system can be checked using the Techstream. The DLC3 is connected to the CAN communication system,

but no DTCs exist regarding problems in the DLC3 or the DLC3 branch wires. If there is trouble in the DLC3 or the DLC3 branch wires,
ECUs on the CAN network cannot output codes to the Techstream.

(b) Trouble in the CAN buses (communication wires) can be checked by measuring the resistance between terminals of the DLC3. However, an

open circuit in a branch wire other than the DLC3 branch wires cannot be checked from the DLC3.
NOTE:  Do not insert the Techstream probes directly into the DLC3. Be sure to use service wires.

Information Bus|Testing and Inspection > < Diagram Information and Instructions|Page 2928