Matrix FWD L4-2.4L (2AZ-FE) (2009)
Air Flow Meter/Sensor: Service and Repair
Installation
2AZ-FE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION
INSTALLATION
1. INSTALL MASS AIR FLOW METER
(a) Install the mass air flow meter with the 2 screws.
Torque: 1.0 Nm (10 kgf-cm, 9 in-lbf)
NOTE: Make sure that the O-ring is not cracked or does not jump out of position during installation.
(b) Connect the mass air flow meter connector.