Matrix FWD L4-2.4L (2AZ-FE) (2009)
2AZ-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL
REMOVAL
1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 4 bolts and the No. 1 exhaust manifold heat insulator.
2. REMOVE AIR FUEL RATIO SENSOR
(a) Disconnect the air fuel ratio sensor connector and wire harness clamp.
(b) Using SST, remove the air fuel ratio sensor.
SST: 09224-00010
Installation
2AZ-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR