Matrix FWD L4-2.4L (2AZ-FE) (2009)
(c) Disconnect the fuel pump harness connector.
NOTE: Do not damage the wire harness.
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.
(e) Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the suction filter and fuel pump from the fuel
filter.
NOTICE:
-
Do not damage the fuel pump filter or fuel filter.
-
Do not remove the suction filter.
-
Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
(f) Disconnect the fuel pump connector.