Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1069002.png)
(b) Perform the following procedure when disconnecting a fuel delivery pipe (metallic type):
HINT: The structure of a fuel tube connector is as shown in the illustration.
(1) Check if there is any damage or foreign objects on the pipe connections.
(2) Remove the No. 2 fuel pipe clamp.
NOTE: Do not reuse the fuel pipe clamp.
(3) Find the metallic connector of the fuel tube assembly.
(4) Assemble SST to the connector as shown in the illustration.
SST: 09268-21010
(5) Turn SST, align the retainers inside the connector with the SST chamfers and insert SST into the connector.
(6) Slide SST and the connector together towards the fuel tube assembly.
(c) Perform the following procedure when connecting a fuel tube connector (metallic type):
(1) Check if there is any damage or foreign objects on the pipe connections.
