Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-857001.png)
Camshaft Position Sensor: Testing and Inspection
2AZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSPECTION
INSPECTION
1. INSPECT CAMSHAFT POSITION SENSOR
(a) Measure the resistance.
Standard Resistance:
HINT: In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F).
Hot means approximately 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the camshaft position sensor.
