Matrix FWD L4-2.4L (2AZ-FE) (2009)
Fuel Pump Relay: Service and Repair
Removal
2AZ-FE ENGINE CONTROL: INTEGRATION RELAY: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INTEGRATION RELAY
(a) Remove the No. 1 relay block cover.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and then pull the integration relay out of the No. 1 relay
block.
(c) Disconnect the 3 connectors.