Matrix FWD L4-2.4L (2AZ-FE) (2009)
Assembly/Installation
42. CONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY
(a) Install the rear seat center outer belt assembly and the rear seat inner belt assembly with the bolt.
Torque: 41 Nm (420 kgf-cm, 30 ft-lbf)
NOTE: Do not allow the anchor part of the rear seat center outer belt assembly and rear seat inner belt assembly to overlap the protruding
part of the floor panel.
43. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
44. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)
45. INSTALL REAR SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation
46. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
47. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly/Installation
48. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
49. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation