Matrix FWD L4-2.4L (2AZ-FE) (2009)
Seat Belt: Testing and Inspection
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY
NOTE: Do not disassemble the retractor.
(a) Before installing the outer belt, check the ELR.
(1) When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor
is over 45°, check that the belt locks.
If the result is not as specified, replace the outer belt assembly.