Matrix FWD L4-2.4L (2AZ-FE) (2009)
Remote Switch: Service and Repair
Removal
AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system
See: Restraint Systems/Air Bag Systems/Service Precautions.
2. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
4. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
5. REMOVE STEERING PAD SWITCH LH
(a) Disconnect the pad switch connector from the spiral cable.
(b) Disengage the clamp.
(c) Remove the screw.
(d) Disengage the 2 pins and remove the steering pad switch LH.
6. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the pad switch connector from the spiral cable.
(b) Disengage the clamp.